1 motor adapter D14 D65 M, Al
1 cover for drive pulley 8 40 M, Al
1 coupling housing D80/d50, Al
1 expanding hub coupling D16/d13, Al/St/TPU
1 drive shaft D14, St, black
1 parallel key DIN 6885-A-5x5x25, St
4 Hexagon Socket Head Cap Screws DIN 7984 M6x50, St, bright zinc-plated
4 Countersunk Screws DIN 7991 M6x16, St, bright zinc-plated
4 hexagon screws ISO 4017 M6x20, St, bright zinc-plated
Motor Fastening Set 8 40 D14 M connects an item Bevel Gearbox D14/D11 and Motor AC D11-180W to a conveyor belt with a centre drive. The Fastening Set is screwed to the Gearbox then mounted on Drive Unit Set M on the right or left side of the conveyor belt. The drive’s orientation can be adjusted in 90° increments.
Motor Fastening Set M transmits power from the Motor to the Drive Pulley. The drive shaft is inserted into the Motor’s hollow shaft without the need for any additional machining. An expanding hub coupling with an elastomer insert compensates for misalignments on the Drive Pulley.
The shaft output on the opposite end of the Drive Pulley is covered over with the cap.