Special features:
item products are based on different modular dimensions and their associated system grooves.
Profiles from Lines 5, 6, 8, 10 and 12 each need corresponding sizes of fasteners.
The profiles in Line X feature a Line 8 system groove but have a particularly flat surface with
minimum curve radii that make them ideal for building sealed constructions.
Components that are RoHS-compliant contain no dangerous substances such as lead or cadmium.
EC Directive 2002/95/EC (RoHS 1) restricts the use of certain substances in electronic devices and components.
These include batteries, etc.
All substances are registered according to the REACH regulation.
REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) ensures that users
have accurate information on the type and properties of operating materials, lubricants, etc.
that they might come into contact with.
Attributes
Line
Line D30
Material
Al, anodized
Delivery unit
1 pce., length 4000 mm
Weight, spec. Length
m =
0.341
kg/m
Details
Accessoires / Service
Cap, Tube D30, grey similar to RAL 7042
Delivery unit
1 pce.
1 pce.
Article-No.
0.0.629.78
0.0.629.78
Cap, Tube D30 ESD, black similar to RAL 9005
Delivery unit
1 pce.
1 pce.
Article-No.
0.0.637.04
0.0.637.04
Tube End Cap D30, grey similar to RAL 7042
Delivery unit
1 set
1 set
Article-No.
0.0.643.96
0.0.643.96
Tube End Cap D30 ESD, black similar to RAL 9005
Delivery unit
1 set
1 set
Article-No.
0.0.644.65
0.0.644.65
Profile Saw Cut, Small Cross-Sections
Delivery unit
1 pce.
1 pce.
Article-No.
0.0.026.30
0.0.026.30
Downloads
Technical documentation(3 MB)
ESD Product Qualification(314 KB)
Deflection calculator
Load 1
Deflection f1x:
0 mm
Bending stress σ1x:
0 N/mm²
Warning! The bending stress exceeds the yield strength of the material.
Deflection f1y:
0 mm
Bending stress σ1y:
0 N/mm²
Warning! The bending stress exceeds the yield strength of the material.
Load 2
Deflection f2x:
0 mm
Bending stress σ2x:
0 N/mm²
Warning! The bending stress exceeds the yield strength of the material.
Deflection f2y incidental:
0 mm
Bending stress σ2y:
0 N/mm²
Warning! The bending stress exceeds the yield strength of the material.
Load 3
Deflection f3x:
0 mm
Bending stress σ3x:
0 N/mm²
Warning! The bending stress exceeds the yield strength of the material.
Deflection f3y incidental:
0 mm
Bending stress σ3y:
0 N/mm²
Warning! The bending stress exceeds the yield strength of the material.
Videos
3. FAQ D30
item-developer Tobias Barnat answers important questions about the Lean Production System D30.
item Line D30 - simple, flexible and efficient!
Simple handling is the key feature of Line D30 and delivers maximum cost efficiency in the continuous improvement of manufacturing processes. It is made possible by non-machined connections, simple joining and a forgiving design principle.
2. FAQ D30
item-developer Tobias Barnat answers important questions about the Lean Production System D30.
7. FAQ D30
item-developer Tobias Barnat answers important questions about the Lean Production System D30.
10. FAQ D30
item-developer Tobias Barnat answers important questions about the Lean Production System D30.
5. FAQ D30
item-developer Tobias Barnat answers important questions about the Lean Production System D30.
8. FAQ D30
item-developer Tobias Barnat answers important questions about the Lean Production System D30.
Lean production 2.0 with item. Design, construction and modification made easier than ever.
"To stay competitive we need to eliminate waste. If we're lean enough, we can stand up to the rest of the world and achieve incredible success," says engineer Stefan Armbruster from item. Cologne University of Applied Sciences has also chosen to use the intelligent system for its Lean Factory project. Why? Expert on all things lean, Prof. Abels explains: "We looked at a lot of tube systems. What we really liked about D30 is its engineering, which is really in harmony with the lean philosophy!"
3. FAQ D30
item-developer Tobias Barnat answers important questions about the Lean Production System D30.item Line D30 - simple, flexible and efficient!
Simple handling is the key feature of Line D30 and delivers maximum cost efficiency in the continuous improvement of manufacturing processes. It is made possible by non-machined connections, simple joining and a forgiving design principle.2. FAQ D30
item-developer Tobias Barnat answers important questions about the Lean Production System D30.7. FAQ D30
item-developer Tobias Barnat answers important questions about the Lean Production System D30.10. FAQ D30
item-developer Tobias Barnat answers important questions about the Lean Production System D30.5. FAQ D30
item-developer Tobias Barnat answers important questions about the Lean Production System D30.8. FAQ D30
item-developer Tobias Barnat answers important questions about the Lean Production System D30.Lean production 2.0 with item. Design, construction and modification made easier than ever.
"To stay competitive we need to eliminate waste. If we're lean enough, we can stand up to the rest of the world and achieve incredible success," says engineer Stefan Armbruster from item. Cologne University of Applied Sciences has also chosen to use the intelligent system for its Lean Factory project. Why? Expert on all things lean, Prof. Abels explains: "We looked at a lot of tube systems. What we really liked about D30 is its engineering, which is really in harmony with the lean philosophy!"Classifications
Classifications are industry-wide product data standards that are used, among other things, to support structured processing in ERP and e-business systems. Do you need the classification data for all item products for your e-procurement system? If so, please don’t hesitate to contact us.
eCl@ss 11.0
23360103
eCl@ss 4.0
35020106
eCl@ss 4.1
35020106
eCl@ss 5.0
35020190
eCl@ss 5.1
35020190
eCl@ss 6.0.1
23360101
eCl@ss 7.1
23360101
eCl@ss 8.0
23360101
UNSPSC 7.0
30102306
UNSPSC 9.0
30102306
customs tariff number
76042990